| Coating system |
cloth basis |
Repairing or overcoating with following lacquers |
Remarks |
| PLATAL® PVF |
PVF foil |
Only with high-grade lacquer system on PUR-AY basis |
Important - first contact manufacturer. |
| PLADUR® PVDF |
PVDF |
Lacquer on AY or PUR-AY basis, possibly with adhesion-promoting coating to specification of manufacturer, adjusted to the coating primer. |
Important - first contact manufacturer. |
| PLADUR® HDP |
HDP |
Two-component PU lacquer |
In addition to cleaning the substrate with water, steam-jet cleaning is necessary. In critical cases, a trial coating should be applied. |
| PLADUR® SP, PLADUR® DU |
SP |
Lacquer drying in the outdoor area on AY, PVC-MP or PUR-AY basis, also dispersion paint in indoor area. |
For pretreatment of substrate, washing off dirt and weather residues with water containing detergents is sufficient. |
| PLATAL®, PVC-Plastisol |
PVC |
PLATAL® repair lacquer or air-drying lacquer can be used to a certain extent, PUR-AY special version |
With older surfaces, check adhesion of old coating before recoating. If necessary, apply a trial coating. |
